Inside Max Value

Wednesday, June 14, 2006

How To Stop Squeaking In Hardwood Flooring

This is an article that explain a few tips to stop the annoying squeaking sound in hardwood flooring.

How To Stop Squeaking In Hardwood Flooring by Roger King

A squeak in hardwood flooring is caused by two pieces of wood rubbing against one another. One way to stop the sound is by reducing the friction of the moving pieces using a lubricant. I’m not talking oil here, but rather a dusting with ultra-fine graphite powder.



This is available at your local hardware stores, and for the most part it’s used to free lock mechanisms. But if you pour a tiny bit of it on the floor so that it can work its way into the squeaking boards, it could very well reduce or eliminate the sound.



If that fails, you can always try a pair of well-placed nails. You first need to pre-drill some slender holes into the wood, angled slightly towards one another. Then drive the nails in, being careful not to bang up the hardwood floor with the head of the hammer.



You can use an 8d or 8-penny finish nail, which has a very small head. Then sink it below the surface of the wood using a nail set. Now you can say good-bye to that squeak forever. You would need a hammer, a small drill bit, and a cordless drill. This would take no more than 15-20 minutes to complete.



Now after you get rid of all the squeaks, use a filler stick in the same color as the floor to fill any nail hole that are visible. When your floor is really starting to show its age, you’ll be able to renew its surface for about a quarter of what it would cost to install a new floor.



You can sand and refinish them, usually up to a total of four times before so much wood is ground away that the nails holding it in place begin to appear. Your hardwood floor should be as good as new.



About The Author:
Roger King has been occupied in home repairs for several years, and has been helping people with tips and advice to simple repairs to their homes. Visit his web site http://www.allhomerepairsyourself.com to learn how to do home repairs yourself.




Article Source: 100% Free Article Directory at ArticleJoe.com


tags: Hardwood Flooring

Thursday, June 08, 2006

World cup promotion

This is a special post about our cleaning service promotion
during the coming World Cup 2006.
This will be especially true to restaurant and bar owners.

And if you are in charge of any type of eateries outlet,
feel free to give us a call for detail explanation and we would
visit your site for a service quotation.

Now is the celebration time for soccer fans around the world.
9th of June mark the beginning of yet another great world cup
matches between 32 countries around the world.

We understand that this is going to be a peak season for anyone
that operates eating outlet,
because soccer fans will be flocking to their favourite spot to
watch the soccer matches of their favourite team.
If you can convince your customer to be a regular customer, that
would mean repeat business.
And that is of course a good thing, isn't it?

But, more people also means more cleaning job to be done.
It includes the dishes, plates, carpets, sofas, floors, walls,
toilets and anything that your customers are will use.

That is just normal, unless your outlet doesn't have a huge
display panel to cast the live matches.
After all, these are actually good problems to have.

Maybe you are starting to get a bit of headache thinking of all
the possibilities.
But don't worry, because, in Max-Value, we have the man power
and the right expertise you need for your cleaning needs.

We will be pleased to be of service to you.

Vacuums Does More Power Mean a Better Clean?

This is a featured article about how to choose the vacuum cleaner that you need.

Vacuums Does More Power Mean a Better Clean? by Carl Carlson

There are many factors to consider when purchasing a vacuum cleaner, and with each manufacturer stressing the importance of the characteristics of their brand of machine, knowing what to look for can become completely overwhelming. In this haze of confusion, some manufacturers will try to emphasize traits that are, in fact, a standard part of most machines, so how do you know which information is the really valuable stuff?



Some manufacturers will stress the importance of the power of their machine, and to the majority of us who are not technologically inclined this seems to make sense. Our vacuum cleaner is twelve amps strong, they boast, and we can’t help but be impressed – until we realize that this is the standard electrical input for most vacuum cleaners. While these twelve amps worth of power is fairly standard, what differentiates machines is how these twelve amps are utilized in the machine itself, and where vacuum effectiveness really lies is in several other factors.



One of these is the design of the filter included in the vacuum. While any cleaner is useless without power to operate it, it is the filtration system that is really responsible for the way that dirt is handled. A poor filtration system will vent some of the dust and dirt removed from your surfaces back into the air again, allowing them to settle on your floor once again, undoing much of the value of vacuuming in the first place.



Another factor to evaluate in any vacuum cleaner is the power of the suction equipment. Vacuuming is once again rendered fairly pointless if your twelve amps of power are not coupled with powerful suction. Closely linked to this is whether your cleaner allows you to adjust the height of the suction device to maximize its power when switching from one type of floor covering to the next. This is an important factor to look for if you have both carpets and wood or tile flooring in your home.



Finally, a vacuum cleaner is of little value if you do not look after it correctly. Twelve amps of electricity will be wasted upon a vacuum that is clogged or full, so be sure to empty your bag or dirt cup regularly and check that all parts of your cleaner are free from debris. It is the manufacturers responsibility to provide you with a high quality cleaner, but remember that some of the performance of your machine depends on you.




Dave is the owner of http://canister-vacuum.info a website providing information on vacuum cleaners.




Article Source: 100% Free Article Directory at ArticleJoe.com


tags: vacuum cleaner

Saturday, June 03, 2006

Carpet Cleaning Tips to Keep Your Carpets Beautiful

Carpet Cleaning Tips to Keep Your Carpets Beautiful
By Rick Hendershot




Your carpets represent a very significant investment, and keeping them clean and new looking is an important part of enhancing the overall look and appeal of your home. Taking proper care of them is absolutely essential to insuring they will have a long and useful life. Here are some carpet cleaning tips to help you retain the beauty and wearability of your carpets.



** Clean your carpets regularly



If you let dirt and oily residue collect on your carpet it will attact further dirt, and walking on the dirty areas will break down both the carpet fibers and the carpet base. It is best to frequently vacuum your carpets to remove as much loose dirt as possible -- to get down into the fibers and pull the dirt out before it becomes much more firmly embedded.



** Remove stains as quickly as possible



Stains are caused by oily liquids dropped on the carpet. The liquid residue saturates areas of the fiber and leaves an ugly stain. Or they can result from dirty shoes or boots in high traffic areas. It is important to remove stains as quickly as possible because they become more difficult to remove when they are allowed to dry and harden.



** Scrape dried soil



If soil or other kinds of dirt have been tracked into areas of your carpet, it will probably be necessary to scrape some of the areas where they have dried into small clumps. Use a blunt metal object to break up the dried spot and loosen the dirt so it can be vacuumed.



** Test spotting agents and stain removers



Not all carpets are the same, and they react differently to different chemical cleaners. Always be sure to test a spotting or stain removal agent before applying it to a critical area. Apply it to a spot in a hidden area, and then let the test dry properly before proceeding to the visible areas of your carpet.



** Follow instructions when using chemical cleaning agents



Do not use a harsh spotter or chemical cleaner without properly testing it, and always begin with a less harsh spotting agent. If that does not work, move on to something that is stronger.



Be sure to follow the instructions provided with the spotting agent. They will usually include recommendations for application strength, and will give you some idea of the kinds of stains they can be effectively used to remove.



Most strong spotters are either high acid or high alkaline based. After using one of these, neutralize the area by applying a neutralizing agent as recommended in the instructions. Or if it is not clear what neutralizing agent to use, use water to rinse the area thoroughly.



** Minimize detergent residue



Whenever you use a detergent to clean your carpet you will probably leave a detergent residue in the fibers. This residue can build up and actually attract dirt and show up as powder within the fibers.



So it is important to remove as much of the detergent residue as possible. Often vacuuming is not enough. You should occasionally use an extraction process that uses rotary scrubbing so the fibers are thoroughly cleaned.




Rick Hendershot publishes Linknet News | Carpet cleaning services in Dallas | Florida Mortgage Guide - Free CD and workbook.



Article Source: http://EzineArticles.com/?expert=Rick_Hendershot